Tag: Drifting

  • Drifting: Heritage and collectibility

    (Editor’s note: During the month of January, the ClassicCars.com Journal presents a series of stories related to and perhaps explaining the recent increase in interest in collecting cars produced by Japan-based automakers.)

    In the last 15 years, the rise of a new motorsport has captured young hearts while creating its own lifestyle and culture around the world. Drifting is an international FIA-sanctioned motorsport originating from Japan that has created a new and growing segment to our evolving car culture.

    Drifting is a driving technique in which the driver purposely forces the car to lose traction, typically by “clutch kicking,” and then oversteers and or countersteers to make their way through a corner with the car angled sideways as much as possible. The technique essentially requires the driver to countersteer to offset momentum to direct the vehicle into the direction of the turn.

    Skililful driving: Nissans in a controlled

    Skililful driving: Nissans in a controlled

    Keiichi Tsuchiha

    Keiichi Tsuchiha

    Kunimitsu Takahashi (right)

    Kunimitsu Takahashi (right)

    Kunimitsu Takahashi, a former professional motorcycle road racer, was considered the “father of drifting” as early as the 1970s. He was able to use his driving techniques to win several championships in the All-Japan Touring Car Championship. He was also the first Japanese rider to win a World Grand Prix motorcycle race.

    Another early “Drift King” was Keiichi Tsuchiya, a two-time 24-Hours of Le Mans winner known for using drifting techniques in non-drifting motorsports and, in his free time, while traveling on the mountain roads of Japan.

    As one of the leaders in popularizing drifting by founding the world’s first organized drifting competition, called the D1 Grand Prix, Tsuchiya not only helped spread the word about drifting but also the love for the Toyota AE86. Driving a Toyota AE86 Sprinter, Trueno, Tsuchiya was also known for “touge” (mountain roads) racing in it. Since then, the AE86 has become a Japanese collector car with direct pop culture ties as well to the popular anime Initial D, with Tsuchiya acting as a consultant.

    Drifting really didn’t really emerge forcefully in the United States until the first season of Formula Drift in 2004, and in 2006 when it was highlighted in the movie The Fast and the Furious: Tokyo Drift. Tsuchiya also consulted for the film as a stunt coordinator and stuntman while making his own cameo appearance on the screen.

    However, in 1996 at Willow Springs Raceway in California, one of the earliest drift events outside of Japan was hosted by the Japanese magazine Option. Founder of the Japanese D1 Grand Prix Daijiro Inada, NHRA Funny Car drag racer Kenji Okazaki, and Keiichi Tsuchiya were showcased by giving demonstrations in a Nissan 180SX brought over from Japan. Since then, sanctioned competitions have evolved into permanent motorsports series.

    Drifting

    Drifting

    Competitive drifting is a judged motorsports competition focused primarily on the ability of the driver to navigate the course with specified acceleration, deceleration, and zones to be filled as well as their ability to “chase” or follow a lead driver in extremely close proximity. Over the years, the expectations of the driver have evolved along with the rule book that is shared internationally between different sanctioned drifting series.

    Popularity of the sport brought in bigger-name drivers, like Tanner Foust and Vaughn Gittin Jr., which led to the increase in interest in the chassis used in drifting. Unlike many other motorsports, drifting does not have rules about which chassis and engines a driver has to run, as long as the rear subframe is factory and the car passes their tech. This allowed drivers to be more creative with their presence on the track.

    tvtropes.org photo

    tvtropes.org photo

    Rear-wheel drive cars were the most popular chassis of choice for drivers, specifically Japanese rear-wheel drive chassis. The Nissan Silvia 240SX became one of the top picks, having won seven D1 Grand Prix championships, and has a very extensive aftermarket product availability for added performance specific to drifting. As the popularity of the 240SX rose, the rarity of an all-original and low-mileage example has become difficult to find, and thus more expensive for collecting.

    The same could be said for the Mazda RX-7, Nissan Skyline, Nissan 350Z, and Toyota Supra that were all featured in the anime series and Japanese manga Initial D and are all currently competitive chassis used at the PRO level of Formula Drift.

    Most recently, drifting has made appearances in many films like Baby Driver, Cars, and the Netflix television series Hyperdrive as well as computer and console gaming like Gran Turismo, Forza Motorsport, the Need for Speed franchise and even indie games like Absolute Drift.

    There has also been a rise in social media celebrities sharing content related to drifting, from driving to building drift cars. There’s even a series of drifting-oriented lifestyle events under the Gridlife banner taking place.

    Formula Drift draws a crowd

    Formula Drift draws a crowd

    As the sport grows and its audience has money to spend, one of the places it is spending is on collectible drift-style vehicles.

    Lately, the Lexus IS300 has been the hottest on the drift enthusiast’s radar, although also being sought are the BMW E36 and specific components from the popular 2JZ Toyota Supra engine.

    Find yourself a clean example of an early 2000 model IS300 with a factory 5-speed manual transmission and you’ll have a unicorn on your hands, and in your collection.

    This article, written by Rebecca Nguyen, was originally published on ClassicCars.com, an editorial partner of Motor Authority.

    Source

  • Nissan S15 Car Build – Staying N/A

    About 3 years ago i picked up an N/A S14 and I did a few bits to it. I drove it every day for about a year and a half. I had the desire to give the S14 a turbo so I picked up a T25 and all of the other bits I needed and just bolted them to the N/A engine. It worked really well, making fairly decent power on the WCP dyno but in all honesty I regretted it almost instantly. It had lost all of the fun of the N/A. This was one of the main reasons I sold it. Below you can see the beauty.

    Modified Nissan S14

    Once I sold it I knew I was going to have to get back in another N/A s-body, so about 2 months ago I saw an N/A s15 up for sale which was still in Japan. There and then I knew I had to get it so put a deposit down on it. Timing worked out well, the S15 landed on the Tuesday and the Jeep I was running sold on the Friday. So on the Saturday after work I headed straight to the garage and picked it up. The pictures he had originally sent me showed a fairly decent car but when i got there I was blown away by how good the car actually was, so that was a really nice surprise. This was it when i was picking it up.

    Modified Nissan S15 Stock

    I only had it for a week and was away from home most of the time, so I got very little time to spend on the car unfortunately, but I did get to service it and got to have a better look underneath. I was delighted with how clean it was.

    Modified Nissan S15 Under

    I picked up some nice big Brembo brakes off an Evo 7, with drilled and grooved discs and a pair of Nismo front lower arms to go along with them. A huge improvement from the originals!

    Modified Nissan S15 Brembo Brakes

    Actually fitting them turned out to be a bit of a dick. It took me almost a month to get a set of adapters to simply bolt the calipers on and I had to change to a bigger BMC . It was just a time consuming and annoying job overall with a bunch of hiccups and hurdles, but it’s done now. I then had the problem that my wheels wouldn’t clear the calipers which I had sort of expected, until Daren Moynihan put a pair of 8.5″ Blitz O3 rims up for sale. I bought them and they fitted nicely, but shortly after he was selling a pair of 9.5 ” O3’s so naturally I bought those too. I now have 6 Blitz O3s when all I wanted was a pair, but hey ho.

    Oh, I also got a new set of HSD Monopro coilovers.

    Modified Nissan S15 suspension

    I finally picked up a pair of seats that I had been wanting for a good while. They were a pair of red genuine B-GREOS . I already had a drivers side Bride Rail sitting here for a while so just loosely fitted the drivers seat.

    Modified Nissan S15 Bucket Seats

    After fitting the new seat, I quickly realised a couple of things;
    1. I’m a fat bastard.
    2. I’m way too tall to fit with the standard wheel. My knees are wrapped around the wheel, so to be able use the seat I’ll need to use a dished steering wheel of some sorts. I already have an NRG snap off kit, but I just hadn’t decided on what wheel to run. I decided to hold off for a while before I decide.

    After installing the coilovers, I rolled my arches properly. Cleaned them all down inside and gave them a few coats of stone chip. Once they were rolled I then gave the lip of the arch a few coats of clear just to make sure they would stay protected. But me being a smart twat, I forgot to take pictures as I was going…

    I also got myself a pair of Toyo Proxes T1’s for the front end.

    Modified Nissan S15 Wheels

    I picked up a DC2 lip and fitted it. I just had to melt the sides with a heat gun to flatten them out so they could reach the length of the bumper, and now it fits fairly well. I just need to paint it!

    Nissan S15 Car Build

    As you can see I painted the DC2 lip, which came out alright for a pretty half assed job.

    Modified Nissan S15 Bonnet Off

    I also fitted the less aggressive one of my B-GREO seats which I fit into nicely. I fitted my snap off boss kit and a small OMP flat wheel that I just had for the drift car. Now I can actually fit into and drive the thing! The OMP wheel will be getting replaced in the near future once I decide what type of wheel I want to run full time. It’s hard to decide what to go for as I prefer a small wheel but it’s very hard to find a wheel in a brand or style that I like. I haven’t taken any interior pics just ones from the outside.

    I decided to take it to IGR drifting in Galway for a little fun! I got the car out on track and I’m very happy with it overall.

    Modified Nissan S15 Drifting

    And here’s just another random pic.

    Modified Nissan S15 night Photography

    Right. So when I put this on the road it was way too low and the tyres were rubbing the arch linings badly. I ended up raising the front end up around 8mm which helped a bit, but it was still rubbing too much. So… I cut up 2 beer cans and used sealant to secure them. This worked for about 2 weeks until they were fully worn through and now they’ve worn into the hoses at the top of the lining. The loom at the back of the arch has also been worn through.

    I’m not really sure where to go from here, I refuse to raise it up so that’s not an option.
    I was planning on tucking the loom above the lip on the frame when I take the car off the road around the end of July, but I need to sort it ASAP as I don’t want to drive the car and make it any worse.
    I also want to keep the arch liners to stop everything getting caked in crap, so I need to figure something out!

    Here’s another random pictures anyway.

    Modified Nissan S15 Build

    I finally got a chance to go at the loom and linings.
    I got quite lucky, the top part of the loom was almost perfect and I didn’t have to alter that at all. But… The back of the loom was a bit rough. So i split the loom, re-insulated all the wires and was able to tuck it up into the back corner of the arch and cable tie it there. I then just pulled the rest of the loom up a bit tighter against the frame and cable tied it up there. Job done!

    Modified Nissan S15 Sideskirts

    Anyway I got some side skirts as you can see in the picture above! I robbed one of my girlfriends Nissan S14 skirts to just try it out of curiosity.

    They looked pretty decent but they were a mile off fitting. Still, they gave me an idea of how a set of skirts would look on the car and I kind of liked them!

    A day or two later a guy local to me put up a pair of standard S14 Kouki skirts for free so i nabbed them. I didn’t know if they’d fit but I thought they’d be worth a punt. So I picked them up, put them up against the car and they were surprisingly close.

    Modified Nissan S15 Custom Sideskirts

    All I ended up having to do was trim a few millimeters off the end of them and make up new end caps. I wasn’t overly keen on how secure the caps were in the end but I’ll come back and fibreglass them on at a later stage.
    I decided to paint these with the gun instead of the rattle cans that I had used for the front lip, as I had a bit more time to do these properly. I’m fairly happy with the finish you can see below.

    Modified Nissan S15 Painting

    I didn’t bother filling any stone chips as I wasn’t sure that I would even like them, but they’re working fine atm. I might pull them off over the winter and re-do them but I’m happy for now.

    Fitting them ended up being a pain. The passenger side went on perfectly first try around. The drivers side took three attempts to get right and as I was using double sided tape to secure them, that ended up being a right struggle. We got there in the end and this is how they turned out, pretty smart I think.

    Modified Nissan S15 New Sideskirts

    I’m still getting used to them but I think I like them for the time being. That’s pretty much it for now. I’m taking the car to Galway drifting again so hopefully the standard clutch can put up with another full day of abuse in the dry!

    Here’s another picture of my N/A drifting experience in the dry.

    Nissan S15 Drifting

    A full days drifting in the dry on a standard clutch and it was flawless, can’t say enough for how well these cars can perform in standard form I don’t get why more people don’t jump on them

    A few more pics.

    Modified Nissan S15 CarModified Nissan S15 Drift build

    Source

  • DWYB 29/04/09 – Drifting baby!

    We needed some promo vids for the X cam – Launching Soon! – so we headed over to santapod with Stu and the boys to rip up some rubber!

    stu-dwyb-drifting-santapod-29-04-09

    Click here for the report and pics.